You are in the Tips & Tricks for Telecommunications, the information is listed newest to oldest...

Changing/Resetting Time on a CTX-28, CTX-100, CTX-670 & CIX-40 system

(For the DK14, 40, 424 or 280 systems, see instructions below)

1.) Press your extension or intercom button while listening to dial tone, then enter #652. You will hear a
confirmation tone (proceed to step 2). If you hear a fast busy, the feature code has been changed or is
not programmed.

2.) Enter the time (HHMMSS) in the 24 hour clock format.
H = Hour, M = Minute, S = Seconds, Use leading Zeros (0): 080530 = 8:05 am and 30 seconds

3.) Press # and you should hear a confirmation tone.

4.) Press SPKR and the telephone should return to idle mode

Note: The day of the week (Monday, Tuesday..etc.) is automatically set by the system.


* Changing/Resetting Time on a DK14, 40, 424 and 280 systems (must be at the main operators station)

1.) Press your extension or intercom button while listening to dial tone, then enter #652. You will hear a
confirmation tone (proceed to step 2). If you hear a fast busy, the feature code has been changed or is
not programmed.

2.) Enter the time (HHMMSS) in the 24 hour clock format.
H = Hour, M = Minute, S = Seconds, Use leading Zeros (0): 080530 = 8:05 am and 30 seconds

3.) Press REDIAL and you should hear a confirmation tone.

4.) Press SPKR and the telephone should return to idle mode


-----------------------------------------

Are you using the speed dial feature on your phone?

We suggest storing Speed Dial numbers on a one touch button: use Speed Dial Codes to store more numbers.

1.) Press Program or dial #9876
2.) Press Spdial
3.) Press 1, then enter a Speed Dial Code (00~99)
4.) Enter the number to be stored in the Speed Dial bin (32 digits max.)
5.) Press Spdial to store the entry
6.) Lift and replace the handset

To clear a number from a Station Speed Dial code

1.) Repeat the previous procedure skipping step 4

To make a call using Speed Dial

1.) Lift handset
2.) Access outside line (if necessary)
3.) Press Spdial, then dial the Station or System Speed Dial Number

Did you know that your volume control will return to its default after hanging up your handset?
During a call, press the VOL UP or VOL DOWN to adjust the sound level. When you hang up the handset the volume returns to the default level. (This does not apply to when the speaker is utilized.)

Manage your mailbox options frequently, thus allowing callers to get up to date information.
To see a quick reference guide click on the link and view the pdf. mailbox.pdf